While recording an exercise:
Upper button
•
press to pause the activity (to access the exercise options)
•
long press to change activity
Middle button
•
press to change displays
•
long press to open exercise options menu
Lower button
•
press to mark a lap
•
long press to lock and unlock buttons
While freediving and scuba diving:
Upper button
•
press to open the options menu (freediving)
•
press to access the list of available gases (Multigas mode only)
•
long press to change brightness
Middle button
•
press to change displays (freediving)
•
press to change arch (scuba diving)
Lower button
•
press to change the switch window item
•
long press to lock and unlock buttons
NOTE: The touch screen is inactive when it is in contact with water. This means that
underwater you have to use the buttons to navigate through displays.
2.2. Adjusting settings
You can adjust all watch settings directly in the watch.
To adjust a setting:
1. From watch face, long press the middle button.
2. Scroll through the settings menu by swiping up/down or by pressing the upper or lower
buttons.
3. Select a setting by tapping the setting name or pressing the middle button when the
setting is highlighted. Go back in the menu by swiping right or selecting Back.
4. For settings with a value range, change the value by swiping up/down or by pressing the
upper or lower button.
Suunto Ocean
9
To Next Page
Loading...
