Suunto Ocean - Gas Time

V
T1
V
gas (liters)
at the beginning of the window
V
T2
V
gas (liters)
at the end of the window
D
average
Average depth in time window
To calculate gas volume, Suunto Ocean uses the following formula:
To compensate for any poor signal between the Suunto Tank POD and Suunto Ocean, the
average gas consumption in the dive summary is calculated as follows:
NOTE: When diving with multiple gases, the average gas consumption value is
calculated using the total dive time. This may cause deviations in the value.
5.6.4. Gas time
The Gas time value in the switch window indicates the maximum time (in minutes) you can
stay at the current depth and ascend to the surface (at an ascent rate of 10 m/min) with and
end pressure of 35 bar (508 psi). The time is based on the tank pressure value, tank size and
your current breathing rate and depth.
Gas time is calculated using the following formula:
NOTE: Safety stops and decompression stops are not included in the Gas time
calculations.
Suunto Ocean
58