Suunto Ocean - Freedive Alarms

Switch window Switch window content Explanation
Temperature The current temperature in degrees Celsius or
Fahrenheit, depending on unit settings.
Max depth The maximum depth reached during the
current dive.
Clock The time in a 12- or 24-hour format, based on
the set time format under Time/date settings in
the watch.
Battery The remaining battery level as percentage.
See 5.4.1. Mandatory dive alarms for battery
alarms.
Average depth The average depth of the current dive is
calculated from the moment the start depth is
exceeded until the dive ends.
Sunset ETA The estimated time until sunset expressed in
hours and minutes. Sunset time is determined
via GPS, so your watch relies on the GPS data
from the last time you used GPS.
Dive count The number of sets during one freedive
exercise.
Total dive time The total time underwater.
Heart rate Your wrist-based heart rate.
6.4. Freedive alarms
There are two configurable alarms for freedive: depth and dive time. For each alarm, you can
customize the audio tone to short or long or have all tones o. In addition to the audio option,
you can also choose to have a vibration alert or if you prefer to have all tones silent, you can
have only vibration on.
In addition to the audible and vibration options, you can choose between two dierent
appearance options: Notify (cyan) or Caution (yellow). You can define a maximum of five
alarms for each configurable alarm and once an alarm appears, you can clear it by pressing
any button.
Depth
Suunto Ocean
74