•
Lower button short press: Change switch window item
•
Lower button long press: Lock buttons
See 3.1. Button and screen lock.
5.2.4. Pre-dive screen and dive options
The pre-dive screen is the same for all dive modes, but each mode has several dive mode
specific options that can be adjusted to your diving needs.
A set of icons appears on the pre-dive screen, depending on what you are using with the dive
mode, such as heart rate, Tank POD and GPS. The following elements can be seen on the
display:
1. Tank POD icon if linked and active
2. GPS signal if enabled
3. Heart rate if enabled
4. Remaining battery time in hours
5. Active gas mix
6. Tank pressure if linked to Tank POD and active
7. The set maximum partial pressure limit (ppO2) for the active gas
8. The maximum operating depth (MOD) for the active gas
9. Active dive mode
Suunto Ocean
40
To Next Page
Loading...
