Suunto Ocean - Altitude Navigation

1. Select a sport mode that uses GPS.
2. Scroll down and select Map.
3. Select which map style you want to use and confirm with the middle button.
4. Scroll up and start your exercise as normal.
5. Press the middle button to go to the map view.
NOTE: If O is selected in map menu, no map will be shown, only a breadcrumb trail.
Select oine maps without exercising:
1. From watch face, swipe up or press the lower button.
2. Scroll down to Map and select it.
3. To exit the map, press the middle button or press the lower button and select Exit.
Map gestures
Lower button
•
Press to open navigation options
Upper button
•
Short press to zoom in
•
Long press to zoom out
Swipe and tap (if enabled)
•
Touch and drag the map to pan
•
Tap to center the map around your current location
•
Flick to scroll the map
8.2. Altitude navigation
If you are navigating a route that has altitude information, you can also navigate based on
ascent and descent using the altitude
profile display. During the exercise, press the middle
button to switch to the altitude
profile display.
The altitude profile display shows you the following information:
•
top: your current altitude
•
center: altitude
profile showing your current position
•
bottom: remaining ascent or descent (tap screen to change views)
If you stray too far o from the route while using altitude navigation, your watch will give you
an O route message in the altitude profile display. If you see this message, scroll to the
route navigation display to get back on track before continuing with altitude navigation.
Suunto Ocean
79