5. Gas change at 6 m. The decompression time is always calculated with the assumption that
you use all the gases found in the Gas list. Once ascending to 6 m, a gas change to NX99
will be suggested. Once switch is made, the information of the current gas appears. If you
decide to dismiss the gas change, the decompression information will not be accurate.
6. Arriving at the last stop. The last decompression stop also includes a 3 min safety stop or
longer if the ascent speed has been violated. Once the decompression stop turns into a
safety stop, the deco badge will disappear from the window.
7. If you ascend above the decompression or safety stop window, an arrow and a warning
will be triggered and prompt you to descend back to the window.
8. Once all stops are done, the Stop done info will appear in the switch window and it is then
safe to ascend to surface.
Suunto Ocean
71
To Next Page
Loading...
