Svantek SV 973 - Page 95

SVAN 973 User Manual
95
Detector
Type of integration of RMS based results for
1/1 Octave and 1/3 Octave analysis: Linear, Fast
or Slow.
Manual
10.2.3
Pause
Automatic pause(s) in the Dosimeter mode, that
can be programmed based on absolute time.
Manual
11.2
Exposure Time
Total time during working day in which the worker
is exposed to the noise. This time is considered for
the LEPd result calculation.
Manual
11.5
Appendix D
Criterion Level
Steady noise level permitted for a full eight-hour
work shift.
Manual
11.3
Threshold Level
Noise level limit below which the dosimeter does
not accumulate noise dose data.
Manual
11.3
Exchange Rate
Amount by which the permitted sound level may
increase if the exposure time is halved.
Manual
11.3
ULT Threshold
Level
Threshold level for calculation of ULT results.
Manual
11.3
PTC Threshold
Level
Threshold level for calculation of PTC results.
Manual
11.3