17. Electrical System
17-17
Foggy light bulb replacement
Hold the foggy light bulb socket.
Rotate the foggy light bulb and remove it.
Replace with new bulb if necessary.
Specification:
Foggy light bulb 12V 27W
Installation
Install the bulb of the headlight in reverse order of
removal.
Meter illumination bulb replacement
Remove the meter board waterproofing rubber.
Uses the slotted screwdriver to turn the indicator
bulb seat in C.C.W. direction, and remove the
indicator bulb.
Uses the round nose pliers turn the illumination
bulb seat in C.C.W. direction, and remove the
illumination bulb.
Specification:
Indicator bulb 12V 1.7W
Illumination bulb 12V 1.7W
Indicator bulb Illumination bulb
To this chapter contents
To Next Page
Loading...
