2. Maintenance Information
2-7
Spark Plug
Recommended spark plug: CR8E
Remove luggage box
Remove central cover.
Remove spark plug cap.
Clean dirt around the spark plug hole.
Remove spark plug.
Measure spark plug gap.
Spark plug gap: 0.6~0.7 mm
Carefully bend ground electrode of the plug to
adjust the gap if necessary.
Hold spark plug washer and install the spark plug
by screwing it.
Tighten the plug by turning 1/2 turn more with plug
socket after installed.
Tighten torque: 1.0~1.2kgf-m
Connect spark plug cap
0.6~0.7mm
Ground electrode
Central electrode
Spark plug
To this chapter contents
To Next Page
Loading...
Need help?
General
