14. Brake System
14-3
Troubleshooting
Soft brake lever
1. Air inside the hydraulic system
2. Hydraulic system leaking
3. Worn master piston
4. Worn brake pad
5. Poor brake caliper
6. Worn brake lining/disk
7. Low brake fluid
8. Blocked brake hose
9. Warp/bent brake disk
10. Bent brake lever
Hard operation of brake lever
1. Blocked brake system
2. Poor brake caliper
3. Blocked brake pipe
4. Seized/worn master cylinder piston
5. Bent brake lever
Uneven brake
1. Dirty brake lining/disk
2. Poor wheel alignment
3. Clogged brake hose
4. Deformed or warped brake disk
5. Restricted brake hose and fittings
Tight brake
1. Dirty brake lining/disk
2. Poor wheel alignment
3. Deformed or warped brake disk
Brake noise
1. Dirty lining
2. Deformed brake disk
3. Poor brake caliper installation
4. Imbalance brake disk or wheel
To this chapter contents
To Next Page
Loading...
Need help?
General
