Symmetricom 5071A User Manual

Chapter 5 Command Reference
5071A Command Summary
74 Operating and Programming Manual
Table 5-2. SCPI Command Summary (Continued)
Command
Parameter Form
Response Form
Comment
DIAGnostic :VOLTage:HWIonizer?
<NR3>
Returns Hot wire ionizer
Volts.
DIAGnostic :VOLTage:MSPec?
<NR3>
Returns Mass
spectrometer Volts.
DIAGnostic :VOLTage:PLLoop?
<NR3,NR3,
NR3,NR3>
Returns Phase-Lock
Loop Volts.
DIAGnostic :VOLTage:ROSCillator?
<NR3>
Returns Quartz OSC
Mon. Volts.
DIAGnostic :VOLTage:SUPPly?
<NR3,NR3,
NR3,NR3>
Returns Power Supply
Volts.
DISPLAY COMMANDS
DISPlay:ENABle
<OFF|0|ON|1>
Sets the Clock Display
ON or OFF.
DISPlay:ENABle?
<0|1>
Returns Clock display
status.
PRECISION TIME (DATE AND TIME) COMMANDS
[SOURce]:PTIMe[:TIME]
<hour>,<minute>,
<second>
Sets 24-hour time.
[SOURce]:PTIMe[:TIME]?
[MIN|MAX,
MIN|MAX,
MIN|MAX]
<NR1,NR1,
NR1>
Returns 24-hour time.
[SOURce]:PTIMe:MJDate
<numeric_value>
Sets modified Julian
date (MJD).
[SOURce]:PTIMe:MJDate?
[MIN|MAX]
<NR1>
Returns the MJD.
[SOURce]:PTIMe:LEAPsecond:DURation
<numeric_value>
Sets Leap second minute
duration.
[SOURce]:PTIMe:LEAPsecond:DURation?
[MIN|MAX]
<NR1>
Returns Leap second
minute duration.
[SOURce]:PTIMe:LEAPsecond:MJDate
<numeric_value>
Sets MJD for a
scheduled leapsecond
(LPS).
[SOURce]:PTIMe:LEAPsecond:MJDate?
[MIN|MAX]
<NR1>
Returns MJD scheduled
leapsecond (LPS).
[SOURce]:PTIMe:LEAPsecond:[:STATe]
<OFF|0|ON|1>
Sets or cancels a
scheduled LPS.
[SOURce]:PTIMe:LEAPsecond:[:STATe]?
<0|1>
Returns status of a
scheduled LPS.
[SOURce]:PTIMe:SLEW
<numeric_value>
Adjusts clock Epoch.
[SOURce]:PTIMe:SLEW?
[MIN|MAX]
<NR3>
Returns MIN/MAX
acceptable Slew-value.

Symmetricom 5071A Specifications

General

Brand	Symmetricom
Model	5071A
Category	Measuring Instruments
Language	English