Symmetricom 5071A - Page 105

Chapter 5 Command Reference
5071A Command Summary
Operating and Programming Manual 77
Table 5-2. SCPI Command Summary (Continued)
Command
Parameter Form
Response Form
Comment
SYSTem:COMMunicate:SERial:BAUD
<numeric value>
9600, 4800, 2400, 1200,
600, 300
Sets baud rate.
SYSTem:COMMunicate:SERial:BITS
<numeric value>
7 or 8
Sets number of
data bits.
SYSTem:COMMunicate:SERial:PARity
<NONE|EVEN|ODD>
Sets parity.
SYSTem:COMMunicate:SERial:SBITs
<numeric value>
1 or 2
Sets number of
stop bits.
SYSTem:COMMunicate:SERial:BAUD?
<NR1>
Returns baud
rate.
SYSTem:COMMunicate:SERial:BITS?
<NR1>
Returns number
of data bits.
SYSTem:COMMunicate:SERial:PARity?
<NONE|EVEN|ODD>
Returns parity.
SYSTem:COMMunicate:SERial:SBITs?
<NR1>
Returns number
of stop bits.