Symmetricom 5071A - Page 104

Chapter 5 Command Reference
5071A Command Summary
76 Operating and Programming Manual
Table 5-2. SCPI Command Summary (Continued)
Command
Parameter Form
Response Form
Comment
STATus:QUEStionable[:EVENt]?
<NR1>
Returns/clears QEReg
contents.
STATus:QUEStionable:CONDition?
<NR1>
Returns QCReg
contents.
STATus:QUEStionable:ENABle
<numeric_value>
Sets QEReg to specified
value.
STATus:QUEStionable:ENABle?
<NR1>
Returns QEReg
contents.
STATus:QUEStionable:NTRansition
<numeric_value>
Sets NTRReg to
specified value.
STATus:QUEStionable:NTRansition?
<NR1>
Returns NTRReg
contents.
STATus:QUEStionable:PTRansition
<numeric_value>
Sets PTRReg to
specified value.
STATus:QUEStionable:PTRansition?
<NR1>
Returns PTRReg
contents.
STATus:PRESet
Resets Control
Registers/clears Status
Output.
SYSTEM COMMANDS
SYSTem:ERRor?
<NR1,string>
Returns error
numbers/messages
SYSTem:KEY
<numeric_value>
Inserts keycode in
keypress queue.
SYSTem:KEY?
[MIN|MAX]
<NR1>
Returns last keypress
code.
SYSTem:PRINt?
<ASCII_string>
Prints status report.
SYSTem:REMote
<OFF|0|ON|1>
Enables/disables remote
operation.
SYSTem:REMote?
<0|1>
Returns remote
operation status.
SYSTem:SCONfiguration
Saves instrument
configuration.
SYSTem:TIME
<hours>,<minutes>,
<seconds>
Sends
SOUR:PTIM:TIME.
SYSTem:TIME?
[MIN|MAX,
MIN|MAX,
MIN|MAX]
<NR1,NR1,
NR1>
Returns 24-hour time.
SYSTem:VERSion?
<NR2>
Returns SCPI Version
number.