Group Calls: Temporary Conference Activation 76 FlexSet 120/280 User Guide
Display Message Key LED
Group Calls: Temporary Conference Activation #1449
The Temporary Conference feature allows an authorized user to establish an
Add-On (Temporary) Group Call by adding participants as the conference is
being set up. For this purpose, vacant Group Calls containing no preset
members are defined system-wide. The Group Call initiator adds members
from his/her station. A Temporary Group Call may include internal stations
and/or external telephone numbers via a public speed call library. A few preset
group calls may be joined to an Add-On Group Call via Public Libraries.
To call a temporary group:
1. Dial Add-On Group Call feature code #1449 or press [ADD ON GROUP CALL]. ADD ON GRP CALL
ON
Listen for the dial tone.
2. Press
[GROUP CALL#] or dial the Group Call access code.
(group#)
ADD ON GROUP CALL ON
3. Dial required stations and/or Public Libraries (up to 5 or 14 destinations,
(group#) yyyy
ADD ON GRP CALL ON
depending on the system configuration).
4. While entering participants, you can erase the last entered participant from
the list by dialing cancellation code
.
5. When the list of participant is completed, dial activation code
. ANSWER (
conf#
)
GRP CALL (
group#
) OFF
6. All the called stations start ringing.
group# = Group Call dial number or name
conf# = Conference Port dial number or name
y = Station/Public Library dial number or name
To Next Page
Loading...
