Group Calls: Submitting Request to Speak 80 FlexSet 120/280 User Guide
Display Message Key LED
Group Calls: Submitting Request to Speak #1443
Members may be permitted to participate in a Group Call with the ability to
speak and hear each other, or in the mute mode. In case of a muted conference
only a Group Call initiator has the right to speak. The user defined as Group
Operator can set his own station to the audible mode, while connected to the
conference, and to grant the right to speak to other participants.
This feature allows you to request permission to speak from the Group
Operator. The request is submitted while your current conference is in
progress, without disturbing it.
To send a request to speak to the Group Operator:
1. Press [REQUEST SPEAK] or [XFER]. ANSWER
xxxx
GRP CALL
(group#)
ON
2. Continue attending the current conference, while watching the
[REQUEST SPEAK] key LED and the second line of display.
3. TRX.ON message prompts that you are given permission to speak:
ANSWER
xxxx
TRX.ON OFF
4. TRX.OFF message prompts that the permission to speak is taken away from ANSWER
xxxx
TRX.OFF OFF
you.
Note: To program a Speech Request key [REQUEST SPEAK], use Help feature
access code #1443, followed by the Group Operator dial number
(see page 85).
x = Group Operator dial number or name
To Next Page
Loading...
