ACD & UCD Groups: Release/Resume From a UCD Group 13 FlexSet 120/280 User Guide
Display Message Key LED
ACD & UCD Groups: Release/Resume From a UCD Group #1991
When your station is a member of a UCD group, you may temporarily exit the
UCD group and then rejoin when required.
To leave a single UCD group:
1. Press [RELEASE HUNT] or dial feature code #1991. ENTER HUNT GR.#
RELEASE HUNT
2. Dial your UCD group number.
3. Dial activation code
. RESUMED
OFF
4. Listen for the confirmation tone. RELEASED
ON
To return to a single UCD group:
1. Press the lit [RELEASE HUNT] or dial feature code #1991. ENTER HUNT GR.#
RELEASE HUNT
2. Dial your UCD group number.
3. Dial cancellation code
. RELEASED
ON
4. Listen for the confirmation tone. RESUMED
OFF
Note: The [RELEASE HUNT] key can be programmed with the feature code
(#1991) plus the relevant UCD group number to use the key as an
on/off switch.
To Next Page
Loading...
