7-130
EC928 E-cam cursor DI detection compensation amount
【
5-6-15
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 - -536870912 ~ 536870912 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0825H/0826H -- -- O -- -- -- --
EC929 E-cam cursor DI detection compensation number
【
5-6-15
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 - 0 ~ 65535 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0827H -- -- O -- -- -- --
Setting Description: The number of the electronic cam cursor compensation amount. The driver will compensate the
compensation value to the Nth cycle according to this value.
EC930.0 Access to self-built curve points
【
5-6-15
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 - 0 ~ 1 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0828H -- -- O -- -- -- --
Setting Description:
Setting Description
0 No access
1 Access
EC931.0 E-cam cursor DI detection compensation source
【
5-6-15
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 - 0 ~ 1 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0829H -- -- O -- -- -- --
Setting Description:
Setting Description
0
The compensation amount is set by EC928 ~
EC929
1
The compensation amount is calculated by
the driver internally
To Next Page
Loading...
