Tektronix DPO4000 Series User Manual

Display Waveform Data
5. Push Invert to invert the signal.
Coupling
DC
Invert
Off
Bandwidth
Full
Fine Scale
100mV/div
Offset
0.00V
Position
0.00 div
Probe
Setup
1X
Select Invert Off for normal operation and
Invert On to invert the polarity of the signal in
the preampli fi er.
6. Push Bandwidth, and select the desired
bandwidth from th e resulting side-bezel menu.
Coupling
DC
Invert
Off
Bandwidth
Full
Fine Scale
100mV/div
Offset
0.00V
Position
0.00 div
Probe
Setup
1X
The set choices are: Full, 250 M Hz, and
20 MHz. Additional choice s may appear,
depending on the probe that you use.
Select Full to set the bandwidth to the full
oscilloscope bandwidth.
Select 250 MHz to set the bandwidth to
250 MHz.
Select 20 MHz to set the bandwidth to 20 MHz.
124 DPO4000 Series User Manual

Tektronix DPO4000 Series Specifications

General

Brand	Tektronix
Model	DPO4000 Series
Category	Test Equipment
Language	English