Tektronix DPO4000 Series - Application Examples; Taking Simple Measurements

Save and Recall In format ion
2. Push R1, R2, R3,orR4.
R1(On) R2(Off) R3(Off) R4(Off)
Removing a Reference Waveform from the Display. To remove a reference waveform from the display:
1. Push Ref R.
2. Push the R1, R2, R3,orR4 screen button to
select a reference waveform.
R1(On) R2(Off) R3(Off) R4(Off)
3. Push the fro nt-panel Ref or the appropriate
lower-bezel R button again to remove the
reference waveform from the display.
The reference waveform is still in nonvolatile
memory and can be displayed again.
DPO4000 Series User Manual 183