Tektronix DPO4000 Series User Manual

Installation
2. Push Utility.
3. Push System repeatedly until you select
Calibration from the resulting po p-up menu.
Calibration
4. Push Signal P a th from the lower-bezel menu.
System
Calibration
Signal Path
Pass
Factory
Pass
5. Push OK Compensate Signal path from the
resulting side-bezel menu.
OK Com-
pensate
Signal Path
The calibration will take approximately
10 minutes to complete.
26 DPO4000 Series User Manual

Tektronix DPO4000 Series Specifications

General

Brand	Tektronix
Model	DPO4000 Series
Category	Test Equipment
Language	English