Tektronix DPO4000 Series User Manual

Installation
4. Power o n the DPO4000. The instrument
automatically recognizes the replacement
firmware and installs it.
If the instrument does not install the firmware,
rerun the procedure. It the problem continues,
contact qualified service personnel.
CAUTION. Do not power off the oscilloscope
or remove the USB storage device until the
oscilloscope finishes installing the firmwar e.
DPO4000 Series User Manual 31

Tektronix DPO4000 Series Specifications

General

Brand	Tektronix
Model	DPO4000 Series
Category	Test Equipment
Language	English