Installation
Network
Configura-
tion
5. Push Change Instrument Settings to
determine the Ethernet address and
instrument name.
On the side-bezel menu, if you are on a
DHCP Ethernet network and using dynamic
addressing, set DHCP to On. If you are using
static addressing, set it to Off.
Change
Instrument
Settings
DHCP/
BOOTP
On Off
Test
Connection
6. Start your browser on your remote computer.
In the browser address line, e nter the IP
address or, if DHCP is set to On in the
oscilloscope, simply enter the instrument
name.
42 DPO4000 Series User Manual
To Next Page
Loading...
