Install Your Ins
trument
Operating Requirements
1. Place the instrument on a cart or bench,
observing cle
arance requirements:
Top: 0in(0mm)
Left and right
side: 3 in (76 mm)
Bottom: 0 in (0
mm) standing on feet,
flip stands down
Rear: 0 in (0 mm) on rear feet
2. Before operating, ensure that the
ambient temperature is between +50 °F
to +113 °F (+1
0°C to +45 °C).
CAUTION. To ensure proper cooling, keep the bottom and sides of the instrument clear of obstructions.
Powering On the Instrument
Power Supply Requirements
Source voltage and Frequency Power Consumption
100–240 V
RMS
±10%, 50–60 Hz
or 115 V
RMS
±10%, 4
00 Hz
≤ 500 W
2 TDS6000B & TDS6000C Series Quick Start User Manual
To Next Page
Loading...
