Analyzing Wavef
orms
Quick Tips
Use vertical histograms to measure signal noise and horizontal histograms to measure signal jitter.
Use the click and drag procedure to activate the shortcut menu to turn the histogram display off.
Using Math Waveforms
Create math waveforms to support the analysis of your channel and reference waveforms. By combining and transforming
source wavefo
rms and other data into math waveforms, you can derive the data view that your application requires.
Use the follow
ing procedure for predefi ned math equations.
1. Select Math > Math Setup....
2. Choose one of the predefined math
equations.
56 TDS6000B & TDS6000C Series Quick Start User Manual
To Next Page
Loading...
Need help?
General
