Pinpoint Trigge
rs
Choosing a Trigger Type
Your instrume
nt allows you to modify basic trigger parameters from the front panel or set up more advanced triggers in
the Trigger Setup control window.
1. Push EDGE.
2. Set the source, coupling, slope and
mode with these front-panel controls.
3. To select one of the other trigger types,
do one of the f
ollowing:
Push ADVANCE
D
Select a trig
ger type directly from the
Trig menu.
4. Complete the trigger setup using the
controls displayed for the trigger type.
The c ontrols to set up the trigger vary
depending on the trigger type.
30 TDS6000B & TDS6000C Series Quick Start User Manual
To Next Page
Loading...
