33
• Saving settings to file:
To save all device settings to file, click on the “Save to file” button.
• Loading settings from file:
To load saved settings from file, click on the “Load from file” button.
Please note that after you make changes, you must write the settings into the device
to be applied. For this, click on the “Write” button.
SIM:
PIN code: if you want to use PIN code management, enter in this section the PIN code of the SIM
card installed in the device. Otherwise, disable PIN code request on the SIM card. If the wrong
PIN code has been entered, the device will try the code only once each time the code is changed
in the settings and PIN code error message will be shown in the system logs. If the wrong code is
configured 3 times consecutively, the SIM card will reach the PUK code request stage. In this
case, install the SIM card into a cellphone, unlock the card by entering the PUK code when
requested, and configure the valid PIN code in the device settings.
APN: the access point name necessary to connect to the Internet. Ask this from the mobile service
provider of the SIM card installed in the device. If no APN is configured, the device will not try to
connect to the Internet. In this case you can only use the functions which do not require Internet
connection, such as voice calls and SMS sending.
APN user name: a user name is necessary only if the mobile service provider provides this and
requires its usage for the given APN.
APN password: a password is necessary only if the mobile service provider provides this and
requires its usage for the given APN.
Device phone number: in this field you can enter the phone number of the SIM card installed in
the device. It has no specific function, its purpose is informational.
SIM card lock: if you enable this option, the device will remember the ID of the SIM card installed,
and will refuse to operate with any other SIM card until the option is disabled.
To Next Page
Loading...
