44
Incoming call management: in this section you can configure for each user what should the
device do when it receives a call from the given user. Available options:
• Forward calls to the simulated line: calls received from the given phone number will be
forwarded to the simulated phone line output. If a landline phone device is connected to the
line output, the phone will ring, and speech communication is possible after accepting the
call.
• Reject calls: the device will reject calls received from the given phone number.
Regardless of this setting, when a call is received from a user phone number, a related service
event is generated for which you can configure output control or notification sending.
E-mail notification recipients (Adapter2 PRO only):
You can configure up to 4 e-mail addresses (MAIL1 to MAIL4) to which the device will send
notification upon event occurrence, according to the event settings.
Name: user/recipient name. The name entered in this section will be used upon selecting the
notification channels when configuring events.
E-mail address: user/recipient e-mail address. You can configure 1 e-mail address per user.
To Next Page
Loading...
