tell Adapter2 - Page 99

116 pages

Save Page as PDF

To Next Page

To Previous Page

Example for selecting the serial communication port in the Babyware programming software:

For Spectra alarm control panels: Baud rate=9600 baud

For EVO alarm control panels: Baud rate=57600 baud

Start connecting:

Then the programming software will open the serial port and will establish the connection with the

alarm control panel.

Main Page

Table of Contents2
Adapter2 Operation4
Key Functions of the Adapter24
Differences between the Adapter2 and the Adapter2 PRO Models4
Differences between the 2G, 3G, 3GA, 4G, 4GA and Wifi Models5
Under Voltage Lock out (UVLO) Function5
Remote Monitoring Application Overview5
General Information about the Notification Process6
Connecting the Terminals and Putting into Operation7
Connections and Wiring7
Input Wiring8
Output Wiring8
SIM Card Holder8
Connecting the Antenna9
Installation9
Putting into Operation9
Status LED Signals10
Technical Specification10
Configuring the Adapter211
The User Interface and Configuration Options of the Software11
Methods for Connecting to the Device12
TELL Servers and Receivers12
Configuring Directly Via USB13
Remote Connecting to Devices Via Cloud Service14
Remote Connecting to Devices Via Peer-To-Peer Connection17
Remote Connecting to Devices Which Are Using the TEX Protocol19
Remote Connecting to Devices Which Are Using the Tellmon Protocol20
Adapter2 Programming Software Usage and Feature Descriptions22
Connection Menu22
Viewing the Settings Options and Configuring Offline22
Connection Type23
Device Register25
Server Register28
Device Settings Menu31
General Device Settings32
Mobile Devices (Adapter2 PRO Only)39
Reporting Channels41
Notification Templates45
Inputs47
Input Events48
Service Events53
Custom Events59
IP Cameras (Adapter2 PRO Only)64
Voice Messages66
Admin Access68
Advanced Settings69
Alarm System Events Menu72
Alarm System Events72
Custom Event Code Names77
Custom User Names80
Custom Partition Names83
Custom Zone Names86
Device Status Menu89
Status Monitoring89
Event Monitoring91
System Event Logs93
Software Settings Menu94
Settings94
About95
Transparent Serial Port96
Remote Programming of Alarm Control Panels96
Paradox Alarm Systems97
DSC Alarm Systems101
Premier and Premier Elite Alarm Systems104
Bentel Alarm Systems107
Inim Alarm Systems110
Arming and Disarming the Alarm Control Panel through the Mobile Application114
Updating the Firmware115
Updating Via USB115
Updating Remotely over the Internet115
Restoring the Factory Default Settings116
Contents of the Package116
About the Manufacturer116

Other manuals for tell Adapter2

Quick Guide For Installers32 pages

tell Adapter2 - Page 99

Table of Contents

Other manuals for tell Adapter2