Tenda W15E - Page 136

125
Parameter description
Parameter
Description
PPPoE Server
PPPoE Authentication
It specifies whether to enable the PPPoE authentication
function.
Server IP
It specifies the IP address of the PPPoE server.
Start/End IP of PPPoE
User
It specifies the IP range of clients assigned by the PPPoE
server after the clients complete PPPoE authentication
successfully.
Primary/Secondary DNS
It specifies the primary DNS and secondary DNS of clients
assigned by the PPPoE server after the clients complete
PPPoE authentication successfully.
Flow Control
Settings
Policy Name
It displays the name of the policy, which cannot be changed.
If the PPPoE authentication is enabled, the Flow Control
Settings rules replace the Bandwidth Control function of the
router.
Upload/Download Rate
It specifies the upload/download rate of the corresponding
policy, which applies to users associated with the flow
control policy.
Operation
: It is used to edit the upload/download rate. The default
value is 1024 KB/s.1Mbps=128KB/s=1024kb/s，1B=8b
Expiration Alert
Alert Before Expiration
It specifies the alert time before expiration. The default value
is 7 days.
Alert Page for Expiring
Account
It specifies the alert texts for expiring account.
You can configure the alert texts by clicking , and
preview the page by clicking Preview.