170
It specifies the IP address of the client obtained from the DHCP server of
the router.
It specifies the MAC address of a client.
It specifies the connection time of a client.
It specifies the remaining IP address lease time of a client.
The IP address obtained from the DHCP server can be used by a client
within the specified lease time.
When the lease time is reached, and the client does not send a DHCP
request, the IP address will be recalled by the DHCP server. When half of
the lease time has elapsed, the client sends a DHCP Request to the DHCP
server to renew the lease time. If the request succeeds, the lease time is
extended according to the request. Otherwise, the client sends the request
again when 7/8 of the lease time has elapsed.
It specifies the MAC address of a client.
It specifies the IP address of a client.
It specifies the current connection speed of the client.
It specifies the connection duration of a client.
It specifies the SSID connected by the wireless client.
It specifies the frequency band of the SSID connected by the client.
It specifies the username used when the VPN client connects to the VPN
server.
It specifies a brief description of the corresponding account.
It specifies the IP address of a VPN client. If the VPN client is a router, it
displays the WAN IP of the router enabled with VPN function.
It specifies the range of IP addresses that the server can assign to clients.
It specifies the account used for PPPoE authentication.
It specifies a brief description of the corresponding account.
It specifies the IP address obtained from the PPPoE server.
It specifies the upload/download rate of a client.
It specifies the account used for WEB authentication.
It specifies a brief description of the corresponding account.
It specifies the time after being authenticated.