Tenda W15E - Page 187

176
B. Specifications
Parameter
Specification
Maximum number
of clients
50
RAM
128 MB
FLASH
16 MB
Internet interface
5 RJ45 10/100 Mbps auto-negotiation ports. By default, there are 1 WAN port and 4
LAN ports.
LED
SYS indicator, 2.4 GHz indicator, 5 GHz indicator, WAN port indicator, and LAN port
indicator.
Button
1 Reset button
Operating/Storage
temperature
0°C ~ 40°C | -40°C ~ 70°C
Operating/Storage
humidity
10% ~ 90% RH (non-condensing) | 5% ~ 90% RH (non-condensing)
Power adapter
AC input: 100V-240V~50/60Hz
DC output: 12V with max. 1A current
Dimensions
220 mm * 135 mm * 30 mm
C. FAQ
Q1. I cannot access the web UI of the router after entering 192.168.0.1. What should I do?
A1. Check the following items:

Ensure the Ethernet cables are correctly connected, and have no loosening.

If you connect to the router wirelessly, ensure that you have connected to the WiFi successfully.

Verify that the IP address of your computer is 192.168.0.X (X: 2~254).

Clear the cache of your web browser or replace the web browser, and try login again.

Disable the firewall of your computer or replace the computer, and try login again.

Verify if the IP address of any other computer in your local area network is 192.168.0.1.

If the problem persists, restore the factory settings of the device and try login again.
Q2. Which connection type should I choose?
A2: