22
Manual DHCP Reservation
The client obtains the same IP address assigned by the DHCP server all the time so as to enable the Filter
Management, Bandwidth Control, and VPN, and so on. Manual DHCP Reservation module enables you to
manually bind the IP address and MAC address of the client.
Adding a Rule
Step 1 To access the Manual DHCP Reservation module, choose Network > LAN Settings.
Step 2 Click +Add.
Step 3 In the windrow that appears, enter the MAC address of the client and the IP address you want to bind.
Step 4 Click OK.
---End
The rule is added successfully, see the following figure.
To Next Page
Loading...
