1-13
System Overview
BPM ProbeBPM Probe
Arterial and/or venous blood parameter modules (BPM) are for monitoring pH, pO
2
,
pCO
2
, K
+
and temperature.
The BPM Probe receives power and commands from and transmits data and parameter
values to the Core using a USB cable. The BPM cable is detachable from the Core, and
the BPM probe may be replaced during a case in the event of a failure. The probe can
be mounted on the CDI782 BPM Bracket, which can be attached securely to standard
heart-lung machine (HLM) poles.
Caution
Do not stare directly into the BPM optics LED.
H/S ProbeH/S Probe
The H/S Probe is a module for measuring
continuous oxygen saturation, hematocrit
and hemoglobin.
The H/S Probe receives power and
communicates with the Core via a cable.
During use, the H/S Probe is attached to an
H/S Cuvette within the extracorporeal circuit
via a keyed mechanical interface.
To Next Page
Loading...