7 Parameterizing, adjusting and analyzing software (P2A software)
115
Field Explanation
Zeroing cycle setting Selection of the time interval after which the
automatic zeroing cycle is to occur.
Recommendation: 15 sec
Field Explanation
Self-adjustment Setting the self-adjustment.
Activate self-
adjustment for the
testo 6615 probe
• Checkbox is activated: The self-
adjustment is performed in the set cycle.
• Checkbox is not activated: The self-
adjustment is not performed.
Self-adjustment
every
Setting the cycletime in which the self-
adjustment is to be performed.
In order to receive reliable readings
during the calibration or equalization
period of the probe, testo
recommends the shortest possible
cycle time.
A longer cycle time can be set in
continuous operation.
[Start self
Start self adjustment at a defined time
outside the cycle time.
To Next Page
Loading...
