7 Parameterizing, adjusting and analyzing software (P2A software)
128
Field Explanation
User Name with which the user is logged into the
operating system.
"Transmitter" entry if the change was
performed at the instrument.
Comments
Type of parameter change, e.g. "Unit of
channel 1 from Pa to hPa".
Selection of adjustment histories: 1-point adjustments / 2-point
/
/
.
Serial no. Probes Serial number of the probe.
Probe operating
hour
Operating hour of the probe at which the
change at the instrument was performed.
User Name with which the user is logged into the
operating system.
"Transmitter" entry if the change was
performed at the instrument.
Reference value If no changes were performed, no value is
displayed.
Unit Unit during the adjustment.
Reading 1-point adjustment: If no changes were
performed, no value is displayed.
To Next Page
Loading...
