7 Parameterizing, adjusting and analyzing software (P2A software)
129
Field Explanation
Offset from 1-point adjustment: Value before the
adjustment.
Offset to 1-point adjustment: Value after the
adjustment.
Offset 2-point adjustment: Difference between
target and actual value reported by
instrument.
Pressure
specification
n-point adjustment: Reference value set at
the pressure sensor.
Channel Analog adjustment: Channel 1 to n.
Specification Analog adjustment: Actual value.
Multimeter Analog adjustment: Reference value set at
the multimeter.
Offset Analog adjustment: Deviation at time of
adjustment.
Selection of probe adjustment histories: 1-point adjustments / 2-
/
.
Serial number Serial number of the transmitter to which the
probe was connected at the time of the
adjustment.
To Next Page
Loading...
