Tonghui TH2816B - Page 74

74
<NR3>,<NR3><NL^END>
If the current secondary limits are not set, “9.9E37” will be returned.
:Auxiliary BIN
The :Auxiliary BIN command sets the auxiliary BIN of the comparator to ON or OFF.
The :Auxiliary BIN? query responds the current ON/OFF condition of the auxiliary
BIN.
Command Syntax
ON
COMParator:Auxiliary BIN OFF
1
0
Where,
0 (decimal 48) When the function is OFF
1 (decimal 49) When he function is ON
Example
WrtCmd(“COMP:ABIN ON”)
Query Syntax
COMParator:Auxiliary BIN?
Query Response
Returned Format is:
<NR1><NL^END>
:SWAP
The :SWAP command sets the swap parameter function to ON (3 BIN settings for
secondary parameter) or OFF (3 BIN settings for primary parameter). The :SWAP?
query responds the current ON/OFF condition of the swap parameter function.
Command Syntax
ON
COMParator:SWAP OFF
1
0
Where,
0 (decimal 48) When the function is OFF
1 (decimal 49) When the function is ON
Example
WrtCmd(“COMP:SWAP ON”)
Query Syntax
COMParator:SWAP?
Query Response
Returned Format is:
<NR1><NL^END>
:BIN:CLEar