18 ERROR DISPLAYS
18-2
● If error still persist after attempting to clear them, contact your local Topcon dealer or Topcon head
office.
Other
E80‘s
Data transmission error between internal
P. C. B.‘s.
Restart and confirm the operation procedure
is correct.
E90‘s
Abnormality in internal memory system.
Repair is required.
E400‘s
Abnormality in auto focusing system. (Only for
GTS-600AF series)
Retry the auto focus by pressing the auto
focus key.
E600‘s Abnormality in angle measuring system.
If this error code continues to display, repair is
required.
E700‘s Abnormality in angle measuring system.
If this error code continues to display, repair is
required.
To Next Page
Loading...
