5-2
5 MEMORY MANAGE MODE
5.2 Protect a File
Protecting one or more files can be accomplished with the file protection mode. When a file is
protected, an asterisk appears after the file name extension. If a file is protected, you can not delete the
file unless you remove the file protection.
Note:All the files stored will be erased by initializing the memory, even if the files are protected.
Operating procedure Operation Display
The memory capacity and the remaining
memory capacity are shown by pressing
[F3](Mem) from Main Menu Icons.
1 Select a file using [F5](↑) key or [F6](↓) key.
2 Press [F1](Pro) key.
Select a
file
[F1]
3 Press [F5](ON) key. *1)
The file is protected and display will return to
file name. *2)
[F5]
*1) When you cancel the protection, repeat the procedure above mentioned and select [F6](OFF) key.
*2) If the file is protected, “ * ” is shown next to the file name.
JIS .DAT 1597 12-25
TOPCON .DAT 1089 10-05
FC7 .TXT 2450 09-11
HILL .DAT 31777 08-19
Pro Ren Del ↑ ↓
Protect
[TOPCON .DAT]
ON OFF
To Next Page
Loading...
