1-4
1 NOMENCLATURE AND FUNCTIONS
1.2 Display
●
Display
In general upper fore lines display the measuring data, and the bottom line displays the soft key
function which is changed by the measuring mode.
●
Contrast
The contrast and illumination of display window are adjusted by star (
★
) key.
●
Heater (Automatic)
The built-in automatic heater functions when the temperature is below 0°C. This keeps the display's
speed up at temperatures lower than 0°C. To set the heater ON/OFF, refer to Chapter 7
“PARAMETERS SETTING MODE”.
●
Example
●
Display marks
Angle measurement mode
V-angle : 87°55’20”
H-angle : 180°44’12”
Distance measurement mode
Horizontal-angle : 87°55’40”
Horizontal distance : 180°44’12”
Relative elevation : 12.345m
Display Contents Display Content
VV-angle (m) Meter unit
V% Percent grade (f) Feet unit
HR H-angle right F Fine mode
HL H-angle left C Coarse mode
HD Horizontal distance T Tracking mode
VD Relative elevation R Repeat measurement
SD Slope distance S Single measurement
NN coordinate N N-times measurement
EE coordinate ppm Atmospheric correction value
ZZ coordinate psm Prism constant value
✻
EDM working
V : 87°55'20"
HR: 180°44'12"
SD HD NEZ 0SET HOLD P1
↓
V : 87°55'40"
HR: 180°44'12" PSM 0.0
SD: 12.345 PPM 0.0
(m) *F.R
MEAS MODE VH HD NEZ P1
↓
To Next Page
Loading...
