3-14
3 STANDARD MEASUREMENT MODE
3.4 DATA OUTPUT
Result of measurement is transferred from the GTS-600 series to Data Collector.
[Example: Distance measurement mode]
Confirm the distance measurement mode.
The following data will be output at each mode.
● The display and the output at the coarse mode are the same as the contents above.
● Output at the tracking mode is displayed as distance data only (HD,VD or SD).
Operating procedure Display
1 Operate the data collector to measure the distance.
Measurement will be started.
2 The result will be shown and transferred to the Data
Collector.
3 The mode will automatically return to the distance
measurement mode.
Mode Output
Angle mode ( V,HR or HL) ( V in percent) V, HR (or HL)
Horizontal distance mode (V,HR, HD, VD) V, HR, HD, VD
Slope distance mode (V, HR,SD) V, HR, SD,HD
Coordinate mode N, E, Z, HR
V: 90°10'20"
HR: 120°30'40" PSM 0.0
HD: < PPM 0.0
VD: (m) *F.R
MEAS MODE VH SD NEZ P1
↓
V : 90°10'20"
HR: 120°30'40" PSM 0.0
HD: 10.1234 PPM 0.0
VD: 1.234 (m) *F.R
REC > > >
V : 90°10'20"
HR: 120°30'40" PSM 0.0
HD: 10.1234 PPM 0.0
VD: 1.234 (m) *F.R
MEAS MODE VH SD NEZ P1
↓
To Next Page
Loading...
