Topcon GTS-601 - Parameters for Communication

7-5
7 PARAMETERS SETTING MODE
7.2.2 Parameters for communication
Operating procedure Operation Display
1 From the main menu icons, press [F6](Para)
to access the parameters option menu.
[F6]
2 Press the [F2] (Communication) key.
[F2]
3 The next steps are same as Section
7.2.1“Parameters for Measurement and
Display” , refer to the section 7.2.1. *1)
*1) Press the [F2](I.GTS) key to reset to the factory default settings (Topcon total station current fixed
protocol).
Factory default settings are indicated with underlines in Section 7.1.2“Parameters for communication” .
Parameters
F1 Measurement
F2 Communication
F3 Password
Parameters (Communication)
B.Rate [1200] 2400 4800 9600
Data.L [ 7 ] 8
Parity none odd [even]
SET I.GTS <- -> ↑ ↓