Topcon X-63 - Activating the Compass

Compass Setup
Inst allingtheCompass
45
X‐63/X‐63i/X‐62/X‐33/X‐32InstallationandCalibrationManual P/N:7010‐0697
7. TapStartin3D‐MC,andslowlyrotatethecompass(Figure60).
Figure60:RotatetheCompassandTapStart
8. Continuerotatingtocompassuntilthecirclein3D‐MCturnsgreen;calibration ofthecompassis
nowdone.
9. Navigatethroughtherestofthemachineconfigurationscreenstosaveyoursettings.
Activating the Compass
1. TapTopconMenuButtonControlCompassEnabled.
2. TapTopconMenuButtonToolsKnownDualSlope...,andsetupthedimensions(Figure61).
Figure61:SettheDualSlopeDimensions
TheCompassworksforallslopesex ceptKnownSlope.