Toptech Systems MultiLoad II SCS

Chapter 6 – Additive Control
226
Firmware Version 3/4.31.37
3. The Remote Additive Calibration menu displays:
4. Highlight Select Additives and press Enter.
C O N F I G U R A T I O N M E N U
Communication
Network
RCU General Setup
RCU Setup
Equipment Setup
Alarm Setup
Products
Additive Cal.
Remote Adtv Cal.
Access ID's
Custom Logic
Customer Logo Setup
Next Prev Exit Enter
REMOTE ADDITIVE CALIBRATION
Select Additives
Collect Samples
Check Delivered
Next Prev Exit Enter