Toptech Systems MultiLoad II SCS User Manual

Chapter 13 – Custom Logic
386
Firmware Version 3/4.31.37
13.2 CUSTOM LOGIC GROUPS
Each line of custom logic can be assigned a value, an operation, a parameter, and so much more. These lines
are executed in order from [0000] to [1024] and can be used to perform tasks that can enhance the MultiLoad’s
capabilities. When a line is selected the Custom Logic Groups menu appears, which lists all of the different types
of options that can be assigned to that line.The different groups are described in more detail in the sections
below.
CUSTOM LOGIC
[0000] UNUSED
[0001] UNUSED
[0002] UNUSED
[0003] UNUSED
[0004] UNUSED
[0005] UNUSED
[0006] UNUSED
[0007] UNUSED
[0008] UNUSED
[0009] UNUSED
[0010] UNUSED
[0011] UNUSED
[0012] UNUSED
[0013] UNUSED
Next Prev Exit Enter
C O N F I G U R A T I O N M E N U
Communication
Network
RCU General Setup
RCU Setup
Security Setup
Equipment Setup
FCM Type Setup
Alarm Setup
Products
Additive Cal.
Remote Adtv Cal.
Access ID’s
Custom Logic
Customer Logo Setup
Next Prev Exit Enter

Toptech Systems MultiLoad II SCS Specifications

General

Brand	Toptech Systems
Model	MultiLoad II SCS
Category	Control Unit
Language	English