Chapter 10– Views and Inquiries
Firmware Version 3/4.31.37
Parameter Descriptions:
Displays the live mA value that is being read by the analog input.
Displays the real-time density.
Displays the current Density offset value, which is the difference between the
Density Unadjusted value and the Density Adjusted (observed density) value.
Displays the observed density as a result of applying the density offset.
10.7 VIEWING RELATIVE DENSITY
From the Views and Inquiry Menu select Relative Density. After selecting the preset and meter, the Relative
Density screen displays:
Parameter Descriptions:
Displays the mA value that is currently being read by the analog input.
Relative Density
Unadjusted
Displays the real-time relative density.
Displays the current Relative Density Offset value, which is the difference
between the Relative Density Unadjusted value and the Relative Density
Adjusted (observed relative density) value.
Relative Density
Adjusted
Displays the observed relative density as a result of applying the relative density
offset.
PRE #1 MTR #1 RELATIVE DENSITY
Relative Density Input: 08.001mA
Relative Density Unadjusted:+0.3000
[1]Relative Density Offset: +0.0000
[2]Relative Density Adjusted: +0.3000
Next Prev Exit
To Next Page
Loading...