Toptech Systems MultiLoad II SCS User Manual

Chapter 13 – Custom Logic
421
Firmware Version 3/4.31.37
Then select a Custom Logic line. The value of the referenced Custom Logic line is the value that will be sent to
the slave device.
SELECT PARAMETER FOR OUTPUT
[0000] UNUSED
[0001] UNUSED
[0002] UNUSED
[0003] UNUSED
[0004] UNUSED
[0005] UNUSED
[0006] UNUSED
[0007] UNUSED
[0008] UNUSED
[0009] UNUSED
[0010] UNUSED
[0011] UNUSED
[0012] UNUSED
[0013] UNUSED
Next Prev Exit Enter
ENTER REGISTER NUMBER
_
Next Prev Exit Enter

Toptech Systems MultiLoad II SCS Specifications

General

Brand	Toptech Systems
Model	MultiLoad II SCS
Category	Control Unit
Language	English