Toro Groundsmaster 7210 - Page 168

InstallingtheGearPump(continued)
3.Positionthegearpumptothetransmissionandsecurethepumpwiththe
2boltsand2lockwashers.
4.Movethehydraulictanktowardtherearofthemachinetoitsproperposition
andassemblethetanktothereservoirsupport;refertoInstallingthe
HydraulicT ank(page4–64).
5.Installtheparkingbrakehandletothemachine;refertoAssemblingthe
ParkingBrakeAssembly(page6–16).Ensurethattheoperationofthe
parkingbrakesensoriscorrectafteryouinstallthebrakehandle.
6.Removethecapsorplugsthatwereinstalledtothehydraulichosesand
ttingsduringtheremovalprocess.
7.Usethelabelsthatyouattachedduringtheremovalprocesstocorrectly
connectthehydraulichosestothettingsonthegearpumpandhydraulic
tank;refertoInstallingtheHydraulicHoseandTube(O-RingFaceSeal
Fitting)(page4–5).
8.Fillthehydraulictankwiththecorrectquantityofnewhydraulicuid.
9.Installtheoperatorseatandseatbase;refertoInstallingtheOperatorSeat
(page6–36).
HydraulicSystem:ServiceandRepairs
Page4–108
Groundsmaster7210
16222SLRevC