Toro Groundsmaster 7210 - Page 272

RemovingtheParkingBrakes(continued)
g033681
Figure188
1.Parkingbrakeassembly3.Brakesupport
2.Locknut4.Hardenedwasher
g033682
Figure189
1.Wheelhub4.Brakesupport
2.Parkingbrakeassembly5.Hardenedwasher
3.Locknut
4.Removetheretainingringandatwasherthatretainsthebrakerodassembly
totheparkingbrakelever.Separatethebrakerodfromthebrakelever.
5.Removethe4boltsand4angenutsthatattachthebrakesupporttothe
frame.
6.Slidethebrakesupport(withtheparkingbrakeassemblyattached)fromthe
wheelhubdiscandframe.
7.Removethe2locknutsthatsecuretheparkingbrakeassemblytothebrake
support,andremovethebrakefromthesupport.
8.Locateandretrievethe2hardenedwashersfromtheparkingbrakeand
brakesupport(Figure188andFigure189).
Chassis:ServiceandRepairs
Page6–10
Groundsmaster7210
16222SLRevC