Toro Groundsmaster 7210 - Page 274

InstallingtheParkingBrakes(continued)
g033683
Figure190
1.Brakeswivel4.Hardenedwasher
2.Caliperbrakelever5.Clearance
3.Wheelhubdisc
7.Adjustthepositionofthebrakesupportsothattheclearancebetweenthe
wheelhubdiscandthe2springsintheparkingbrakeis0.8to1.7mm(0.030
to0.070inch).Whentheclearanceiscorrect,fullytightenthe4boltsand
4angenuts(Figure190).
8.Installthebrakerodassemblytotheparkingbrakeleverwiththeatwasher
andretainingring.
9.Installthewheeltothemachinewiththe5wheel-lugnuts.
10.Lowerthewheeltothegroundandtorquethe5wheel-lugnutsto102to115
N∙m(75to85ft-lb)inacrossingpattern.
11.Ifthewheelhubwasremoved,settheparkingbrakeandtorquethelocknut
(item1inFigure187)to407to542N∙m(300to400ft-lb).Releasethe
parkingbrake.
12.Checktheoperationoftheparkingbrakeandparkingbrakesensor.
Chassis:ServiceandRepairs
Page6–12
Groundsmaster7210
16222SLRevC